Main Performance The product can be used in petroleum, chemical, laboratory, medical and other fields to quickly rinse chemical liquids splash in eyes and face to minimize injury.
• Made of polyethylene, it has the advantages of high strength, good toughness, rigidity, heat and cold resistance.
• Ergonomically designed to generate water pressure using gravity and deliver water to two eye wash nozzles
• The drain hole at the bottom facilitates regular replacement of the flushing fluid
•Suitable for workplaces without water supply and discharge facilities and can be fixed to the wall according to requirements, or can be used with the cart
•It is recommended to discharge the liquid in eye wash station every two or four weeks and clean the components of eye wash station
2 models available: FSEW08P 30L (8 gallons) and FSEW16P 60L (16 gallons)
1. Pull down the yellow handle of the eye wash to perform emergency flushing quickly. The flow rate is 0.4 gpm (1.5 L/min), comply with the ANSI Z358.1 continuous flushing requirement of 15 minutes.
2.Eye wash station should be installed in an accessible location to ensure that injured personnel could arrive within 10 seconds.
3.Direct the injured person to the nearest eye wash station immediately after accident.
4.Open eyes widely and wash thoroughly for 15 minutes minimum.
5.Need to see a doctor immediately after the washing.